ITC on capital goods is allowed in full, in one go, when the goods are capitalised in your books and used in business, and you do not claim depreciation on the GST part. Cars, buildings and some works contracts are blocked. If you sell the asset later, you pay back part of the credit.
This guide sits under how to claim ITC. It covers machinery, computers and furniture: what counts, what is blocked, how part-exempt use is handled, and what the law asks when you sell.
- What counts as capital goods and plant and machinery?
- Can you claim the full ITC at once?
- ITC and depreciation: Section 16(3)
- When is ITC on capital goods blocked?
- What if the asset is partly for exempt or non-business use?
- ITC reversal on sale of capital goods
- Switching to composition, or supplies turn wholly exempt
- Worked example (hypothetical numbers)
- Checklist
- Frequently asked questions
- Sources
What counts as capital goods and plant and machinery?
Section 2(19) of the CGST Act is short. Capital goods means goods whose value is capitalised in the books of the person claiming the credit, and which are used or intended to be used in the course or furtherance of business. A laptop, an office table, a lathe and a delivery van all pass it, if you capitalise them.
"Plant and machinery" is a narrower term, and it matters in one place only: the immovable-property block in Section 17(5)(c) and (d). The Explanation to Section 17 defines it as apparatus, equipment and machinery fixed to earth by foundation or structural support, used for making outward supplies, including that foundation and support. It excludes:
- land, buildings and any other civil structures;
- telecommunication towers; and
- pipelines laid outside the factory premises.
So a press bolted to a concrete base is plant and machinery, and the base counts with it. The shed around it does not. A laptop is capital goods but not plant and machinery. It does not need to be, since nothing in Section 17(5) blocks computers.
Can you claim the full ITC at once?
Yes. Rule 43(1)(b) and (c) credit the tax on the invoice directly to the electronic credit ledger, unless the goods are used exclusively for exempt supplies or exclusively for non-business purposes (clause (a)). The usual Section 16 conditions apply, including the Section 16(4) time limit of 30 November after the financial year of the invoice (or the annual return, if earlier). See the ITC last date page.
ITC and depreciation: Section 16(3)
This is the trap. Section 16(3) says that if you claim depreciation under the Income-tax Act, 1961 on the tax component of the cost of capital goods and plant and machinery, the ITC on that tax component is not allowed.
In practice you choose. Take the ITC and depreciate the cost without GST, or skip the ITC and depreciate the cost with GST. You cannot do both.
When is ITC on capital goods blocked?
Section 17(5) overrides everything above. Four clauses touch capital goods. Our blocked credit guide covers the full list.
- Motor vehicles, 17(5)(a). Vehicles for carrying persons, with approved seating of not more than thirteen including the driver, are blocked unless used for further supply of such vehicles, transporting passengers, or driving training. Read ITC on cars and motor vehicles for the details.
- Vessels and aircraft, 17(5)(aa). Blocked unless used for further supply of vessels or aircraft, transporting passengers, training on navigating or flying them, or transporting goods.
- Works contracts, 17(5)(c). Works contract services for construction of immovable property (other than plant and machinery) are blocked, unless they are an input service for further supply of works contract service.
- Own-account construction, 17(5)(d). Goods or services received for constructing immovable property (other than plant and machinery) on your own account are blocked, even if used in business. "Construction" includes re-construction, renovation, additions, alterations and repairs, to the extent capitalised.
| Asset | Capital goods? | ITC |
|---|---|---|
| Laptop, server, printer | Yes, if capitalised | Allowed (subject to Section 16) |
| Office furniture | Yes, if capitalised | Allowed (subject to Section 16) |
| Machine on its own foundation | Yes, and plant and machinery | Allowed; foundation counts too |
| Five-seater car for staff | Yes, if capitalised | Blocked under 17(5)(a), unless an exception applies |
| Factory shed or building you build | Civil structure | Blocked under 17(5)(c)/(d) |
What if the asset is partly for exempt or non-business use?
Rule 43 handles capital goods used for both taxable and exempt supplies, or for business and non-business purposes. Keep three cases apart.
- Used only for exempt supplies or non-business: the tax is shown in GSTR-3B and is not credited to the ledger.
- Used only for taxable (including zero-rated) supplies: credited, shown in GSTR-3B.
- Used for both ("common" capital goods): you credit the full tax, then reverse a slice every month for the useful life.
Rule 43 takes useful life as five years from the invoice date, so 60 months. Each month's share of the common credit is the total credit divided by 60. You add the exempt portion of that share (exempt turnover over total turnover, E/F, for the month) to your output tax liability, with interest where applicable. See our Rule 42 and 43 tutorial for the working.
ITC reversal on sale of capital goods
Selling a machine you took full credit on can cost you money. Section 18(6) says that on a supply of capital goods or plant and machinery on which ITC was taken, you pay an amount equal to the ITC taken, reduced by the percentage points prescribed, or the tax on the transaction value under Section 15, whichever is higher.
The Rules give the reduction in two places. Rule 44(6) says the amount is worked out like stock on switching to composition: ITC for the remaining useful life in months, pro rata, with useful life as five years. A part of a month is ignored. So credit C on an asset with 36 months left becomes C × 36/60. You work it out separately for central, State or UT, and integrated tax.
Rule 40(2) also covers Section 18(6). It reduces the input tax by 5 percentage points for every quarter or part of a quarter from the invoice date. The two agree when an asset is a whole number of quarters old, as in the example below. They differ for part periods. At 4 years, 6 months and 15 days, Rule 44(6) leaves 5/60 of the credit, while Rule 40(2) counts 19 quarters and leaves 5 per cent. Rule 44(6) is the one that carries the GSTR-1 reporting proviso, but ask your CA which method to follow.
The proviso to Rule 44(6) says that where the Rule 44 amount is higher than the tax on the transaction value, that amount forms part of your output tax liability and is furnished in GSTR-1. The proviso to Section 18(6) lets you pay just the tax on the transaction value when refractory bricks, moulds, dies, jigs and fixtures are supplied as scrap.
Switching to composition, or supplies turn wholly exempt
Section 18(4) applies when a person who has taken ITC opts for composition under Section 10, or when the goods or services they supply become wholly exempt. They must pay an amount, by debit to the electronic credit ledger or cash ledger, equal to the credit on inputs in stock, inputs in semi-finished or finished goods, and capital goods, reduced by the prescribed percentage points, as on the day before the option or exemption. Anything left in the ledger afterwards lapses.
Rule 44(1)(b) sets the capital goods figure by the same remaining-life-in-months over 60 method, and Rule 44(4) says it forms part of output tax liability and goes in Form GST ITC-03. See composition dealer ITC.
Worked example (hypothetical numbers)
All figures are made up, and the GST rate is only for the sum.
A machine bought, then sold after two years
A manufacturer buys a machine for ₹10,00,000 plus 18% GST (₹1,80,000) and takes the full ITC. The machine is capitalised at ₹10,00,000, and the owner claims no depreciation on the GST part, so Section 16(3) is met.
Exactly 24 months after the invoice date it is sold. Remaining useful life is 60 − 24 = 36 months. ITC attributable to it: ₹1,80,000 × 36/60 = ₹1,08,000. Rule 40(2) gives the same figure here: 8 quarters at 5 points is 40 per cent off, leaving 60 per cent.
- Sale at ₹5,00,000 plus 18% GST: tax on transaction value is ₹90,000. The ITC-based figure of ₹1,08,000 is higher, so ₹1,08,000 is payable. Since it exceeds the tax on the sale value, it goes in GSTR-1 as output tax liability. The buyer is charged GST on ₹5,00,000 as usual, so ₹18,000 of the amount you pay is extra, beyond the tax collected on the sale.
- Sale at ₹7,00,000 plus 18% GST: tax on transaction value is ₹1,26,000. That is higher, so you pay ₹1,26,000 as normal output tax.
Checklist
- Capitalise the asset in your books and use it in business.
- Check Section 17(5): car, building, works contract?
- Decide on depreciation: net of GST if you take the ITC.
- Mark exempt or non-business use at purchase, and set up the monthly common credit if mixed.
- Claim before the Section 16(4) date.
- Before a sale, work out the Rule 44(6) amount against the tax on sale value.
- Before opting for composition, work out the Section 18(4) amount and plan ITC-03.
How LekhaBooks helps
The Fixed Assets tutorial shows how to capitalise an asset under REPORTS & BOOKS > Fixed Assets, choose an ITC treatment (Claim ITC fully, ITC blocked under §17(5) or ITC not applicable), and run depreciation under both the Companies Act and the Income-tax Act. With ITC claimed, the asset is booked at net cost and the GST goes to Input CGST/SGST/IGST. When you sell, the sale or scrap tutorial lets you preview the gain or loss and the GST on the sale before posting. It does not say it works out the Section 18(6) amount, so work that out separately and check it with your CA.
Frequently asked questions
Can I claim ITC on a laptop or office furniture?
Yes, if the item is capitalised in your books and used in business. Section 2(19) defines capital goods that way, and no clause of Section 17(5) blocks computers or furniture as such. Section 16(3) still applies if you claim depreciation on the GST part.
Is ITC on capital goods allowed in one instalment?
Yes. Unless the goods are used wholly for exempt supplies or wholly for non-business purposes, Rule 43(1)(b) and (c) say the tax on the invoice is credited directly to the electronic credit ledger. The Section 16 conditions and the Section 16(4) time limit still apply.
Can I claim depreciation on the GST amount and also ITC?
No. Section 16(3) says that if you claim depreciation under the Income-tax Act on the tax component of the cost of capital goods, the ITC on that tax component is not allowed. Pick one.
What do I pay if I sell a machine on which I took ITC?
Under Section 18(6), the higher of two amounts: the ITC taken, reduced as prescribed, or the tax on the transaction value. Rule 44(6) works out the first amount by the remaining useful life in months out of 60. Rule 40(2) states a different method, 5 percentage points per quarter, so check which your CA applies. If the first amount is the higher one, it goes in your GSTR-1 as output tax liability.
Is a building or factory shed covered by ITC on plant and machinery?
No. The Explanation to Section 17 excludes land, buildings and other civil structures from plant and machinery. Section 17(5)(c) and (d) block credit on construction of immovable property other than plant and machinery.
This is general information, not tax advice. Confirm with your CA before you act on it.
Sources
Official texts this page was checked against on 10 November 2026:
- CGST Act, Section 2(19), capital goods
- CGST Act, Section 16 (sub-sections 16(3) and 16(4))
- CGST Act, Section 17 (17(5) and the Explanation on plant and machinery)
- CGST Act, Section 18(4) and 18(6)
- CGST Rule 43
- CGST Rule 44
- CGST Rule 40 (sub-rule (2): 5 percentage points per quarter on sale)